diff --git a/conf/default.conf.php b/conf/default.conf.php
index 426d00f774..6b856ea69f 100644
--- a/conf/default.conf.php
+++ b/conf/default.conf.php
@@ -1,1202 +1,1219 @@
null,
// If you have multiple environments, provide the production environment URI
// here so that emails, etc., generated in development/sandbox environments
// contain the right links.
'phabricator.production-uri' => null,
// Setting this to 'true' will invoke a special setup mode which helps guide
// you through setting up Phabricator.
'phabricator.setup' => false,
// -- IMPORTANT! Security! -------------------------------------------------- //
// IMPORTANT: By default, Phabricator serves files from the same domain the
// application lives on. This is convenient but not secure: it creates a large
// class of vulnerabilities which can not be generally mitigated.
//
// To avoid this, you should configure a second domain in the same way you
// have the primary domain configured (e.g., point it at the same machine and
// set up the same vhost rules) and provide it here. For instance, if your
// primary install is on "http://www.phabricator-example.com/", you could
// configure "http://www.phabricator-files.com/" and specify the entire
// domain (with protocol) here. This will enforce that files are
// served only from the alternate domain. Ideally, you should use a
// completely separate domain name rather than just a different subdomain.
//
// It is STRONGLY RECOMMENDED that you configure this. Your install is NOT
// SECURE unless you do so.
'security.alternate-file-domain' => null,
// Default key for HMAC digests where the key is not important (i.e., the
// hash itself is secret). You can change this if you want (to any other
// string), but doing so will break existing sessions and CSRF tokens.
'security.hmac-key' => '[D\t~Y7eNmnQGJ;rnH6aF;m2!vJ8@v8C=Cs:aQS\.Qw',
// -- Customization --------------------------------------------------------- //
// If you want to use a custom logo (e.g., for your company or organization),
// copy 'webroot/rsrc/image/custom/example_template.png' to
// 'webroot/rsrc/image/custom/custom.png' and set this to the URI you want it
// to link to (like http://www.yourcompany.com/).
'phabricator.custom.logo' => null,
// -- Internationalization -------------------------------------------------- //
// This allows customizing texts used in Phabricator. The class must extend
// PhabricatorTranslation.
'translation.provider' => 'PhabricatorEnglishTranslation',
// You can use 'translation.override' if you don't want to create a full
// translation to give users an option for switching to it and you just want
// to override some strings in the default translation.
'translation.override' => array(),
// -- Access Policies ------------------------------------------------------- //
// Phabricator allows you to set the visibility of objects (like repositories
// and source code) to "Public", which means anyone on the internet can see
// them, even without being logged in. This is great for open source, but
// some installs may never want to make anything public, so this policy is
// disabled by default. You can enable it here, which will let you set the
// policy for objects to "Public". With this option disabled, the most open
// policy is "All Users", which means users must be logged in to view things.
'policy.allow-public' => false,
// -- Logging --------------------------------------------------------------- //
// To enable the Phabricator access log, specify a path here. The Phabricator
// access log can provide more detailed information about Phabricator access
// than normal HTTP access logs (for instance, it can show logged-in users,
// controllers, and other application data). If not set, no log will be
// written.
//
// Make sure the PHP process can write to the log!
'log.access.path' => null,
// Format for the access log. If not set, the default format will be used:
//
// "[%D]\t%h\t%u\t%M\t%C\t%m\t%U\t%c\t%T"
//
// Available variables are:
//
// - %c The HTTP response code.
// - %C The controller which handled the request.
// - %D The request date.
// - %e Epoch timestamp.
// - %h The webserver's host name.
// - %p The PID of the server process.
// - %R The HTTP referrer.
// - %r The remote IP.
// - %T The request duration, in microseconds.
// - %U The request path.
// - %u The logged-in user, if one is logged in.
// - %M The HTTP method.
// - %m For conduit, the Conduit method which was invoked.
//
// If a variable isn't available (for example, %m appears in the file format
// but the request is not a Conduit request), it will be rendered as "-".
//
// Note that the default format is subject to change in the future, so if you
// rely on the log's format, specify it explicitly.
'log.access.format' => null,
// -- DarkConsole ----------------------------------------------------------- //
// DarkConsole is a administrative debugging/profiling tool built into
// Phabricator. You can leave it disabled unless you're developing against
// Phabricator.
// Determines whether or not DarkConsole is available. DarkConsole exposes
// some data like queries and stack traces, so you should be careful about
// turning it on in production (although users can not normally see it, even
// if the deployment configuration enables it).
'darkconsole.enabled' => false,
// Always enable DarkConsole, even for logged out users. This potentially
// exposes sensitive information to users, so make sure untrusted users can
// not access an install running in this mode. You should definitely leave
// this off in production. It is only really useful for using DarkConsole
// utilities to debug or profile logged-out pages. You must set
// 'darkconsole.enabled' to use this option.
'darkconsole.always-on' => false,
// Allows you to mask certain configuration values from appearing in the
// "Config" tab of DarkConsole.
'darkconsole.config-mask' => array(
'mysql.pass',
'amazon-ses.secret-key',
'recaptcha.private-key',
'phabricator.csrf-key',
'facebook.application-secret',
'github.application-secret',
'google.application-secret',
'phabricator.application-secret',
'disqus.application-secret',
'phabricator.mail-key',
'security.hmac-key',
),
// -- MySQL --------------------------------------------------------------- //
// Class providing database configuration. It must implement
// DatabaseConfigurationProvider.
'mysql.configuration-provider' => 'DefaultDatabaseConfigurationProvider',
// The username to use when connecting to MySQL.
'mysql.user' => 'root',
// The password to use when connecting to MySQL.
'mysql.pass' => '',
// The MySQL server to connect to. If you want to connect to a different
// port than the default (which is 3306), specify it in the hostname
// (e.g., db.example.com:1234).
'mysql.host' => 'localhost',
// The number of times to try reconnecting to the MySQL database
'mysql.connection-retries' => 3,
// Phabricator supports PHP extensions MySQL and MySQLi. It is possible to
// implement also other access mechanism (e.g. PDO_MySQL). The class must
// extend AphrontMySQLDatabaseConnectionBase.
'mysql.implementation' => 'AphrontMySQLDatabaseConnection',
// -- Notifications --------------------------------------------------------- //
'notification.enabled' => false,
// Client port for the realtime server to listen on, and for realtime clients
// to connect to. Use "localhost" if you are running the notification server
// on the same host as the web server.
'notification.client-uri' => 'http://localhost:22280/',
// URI and port for the notification root server.
'notification.server-uri' => 'http://localhost:22281/',
// The server must be started as root so it can bind to privileged ports, but
// if you specify a user here it will drop permissions after binding.
'notification.user' => null,
// Location where the server should log to.
'notification.log' => '/var/log/aphlict.log',
// PID file to use.
'notification.pidfile' => '/var/run/aphlict.pid',
// Enable this option to get additional debug output in the browser.
'notification.debug' => false,
// -- Email ----------------------------------------------------------------- //
// Some Phabricator tools send email notifications, e.g. when Differential
// revisions are updated or Maniphest tasks are changed. These options allow
// you to configure how email is delivered.
// You can test your mail setup by going to "MetaMTA" in the web interface,
// clicking "Send New Message", and then composing a message.
// Default address to send mail "From".
'metamta.default-address' => 'noreply@example.com',
// Domain used to generate Message-IDs.
'metamta.domain' => 'example.com',
// When a message is sent to multiple recipients (for example, several
// reviewers on a code review), Phabricator can either deliver one email to
// everyone (e.g., "To: alincoln, usgrant, htaft") or separate emails to each
// user (e.g., "To: alincoln", "To: usgrant", "To: htaft"). The major
// advantages and disadvantages of each approach are:
//
// - One mail to everyone:
// - Recipients can see To/Cc at a glance.
// - If you use mailing lists, you won't get duplicate mail if you're
// a normal recipient and also Cc'd on a mailing list.
// - Getting threading to work properly is harder, and probably requires
// making mail less useful by turning off options.
// - Sometimes people will "Reply All" and everyone will get two mails,
// one from the user and one from Phabricator turning their mail into
// a comment.
// - Not supported with a private reply-to address.
// - Mails are sent in the server default translation.
// - One mail to each user:
// - Recipients need to look in the mail body to see To/Cc.
// - If you use mailing lists, recipients may sometimes get duplicate
// mail.
// - Getting threading to work properly is easier, and threading settings
// can be customzied by each user.
// - "Reply All" no longer spams all other users.
// - Required if private reply-to addresses are configured.
// - Mails are sent in the language of user preference.
//
// In the code, splitting one outbound email into one-per-recipient is
// sometimes referred to as "multiplexing".
'metamta.one-mail-per-recipient' => true,
// When a user takes an action which generates an email notification (like
// commenting on a Differential revision), Phabricator can either send that
// mail "From" the user's email address (like "alincoln@logcabin.com") or
// "From" the 'metamta.default-address' address. The user experience is
// generally better if Phabricator uses the user's real address as the "From"
// since the messages are easier to organize when they appear in mail clients,
// but this will only work if the server is authorized to send email on behalf
// of the "From" domain. Practically, this means:
// - If you are doing an install for Example Corp and all the users will
// have corporate @corp.example.com addresses and any hosts Phabricator
// is running on are authorized to send email from corp.example.com,
// you can enable this to make the user experience a little better.
// - If you are doing an install for an open source project and your
// users will be registering via Facebook and using personal email
// addresses, you MUST NOT enable this or virtually all of your outgoing
// email will vanish into SFP blackholes.
// - If your install is anything else, you're much safer leaving this
// off since the risk in turning it on is that your outgoing mail will
// mostly never arrive.
'metamta.can-send-as-user' => false,
// Adapter class to use to transmit mail to the MTA. The default uses
// PHPMailerLite, which will invoke "sendmail". This is appropriate
// if sendmail actually works on your host, but if you haven't configured mail
// it may not be so great. You can also use Amazon SES, by changing this to
// 'PhabricatorMailImplementationAmazonSESAdapter', signing up for SES, and
// filling in your 'amazon-ses.access-key' and 'amazon-ses.secret-key' below.
'metamta.mail-adapter' =>
'PhabricatorMailImplementationPHPMailerLiteAdapter',
// When email is sent, try to hand it off to the MTA immediately. This may
// be worth disabling if your MTA infrastructure is slow or unreliable. If you
// disable this option, you must run the 'metamta_mta.php' daemon or mail
// won't be handed off to the MTA. If you're using Amazon SES it can be a
// little slugish sometimes so it may be worth disabling this and moving to
// the daemon after you've got your install up and running. If you have a
// properly configured local MTA it should not be necessary to disable this.
'metamta.send-immediately' => true,
// If you're using Amazon SES to send email, provide your AWS access key
// and AWS secret key here. To set up Amazon SES with Phabricator, you need
// to:
// - Make sure 'metamta.mail-adapter' is set to:
// "PhabricatorMailImplementationAmazonSESAdapter"
// - Make sure 'metamta.can-send-as-user' is false.
// - Make sure 'metamta.default-address' is configured to something sensible.
// - Make sure 'metamta.default-address' is a validated SES "From" address.
'amazon-ses.access-key' => null,
'amazon-ses.secret-key' => null,
// If you're using Sendgrid to send email, provide your access credentials
// here. This will use the REST API. You can also use Sendgrid as a normal
// SMTP service.
'sendgrid.api-user' => null,
'sendgrid.api-key' => null,
// You can configure a reply handler domain so that email sent from Maniphest
// will have a special "Reply To" address like "T123+82+af19f@example.com"
// that allows recipients to reply by email and interact with tasks. For
// instructions on configurating reply handlers, see the article
// "Configuring Inbound Email" in the Phabricator documentation. By default,
// this is set to 'null' and Phabricator will use a generic 'noreply@' address
// or the address of the acting user instead of a special reply handler
// address (see 'metamta.default-address'). If you set a domain here,
// Phabricator will begin generating private reply handler addresses. See
// also 'metamta.maniphest.reply-handler' to further configure behavior.
// This key should be set to the domain part after the @, like "example.com".
'metamta.maniphest.reply-handler-domain' => null,
// You can follow the instructions in "Configuring Inbound Email" in the
// Phabricator documentation and set 'metamta.maniphest.reply-handler-domain'
// to support updating Maniphest tasks by email. If you want more advanced
// customization than this provides, you can override the reply handler
// class with an implementation of your own. This will allow you to do things
// like have a single public reply handler or change how private reply
// handlers are generated and validated.
// This key should be set to a loadable subclass of
// PhabricatorMailReplyHandler (and possibly of ManiphestReplyHandler).
'metamta.maniphest.reply-handler' => 'ManiphestReplyHandler',
// If you don't want phabricator to take up an entire domain
// (or subdomain for that matter), you can use this and set a common
// prefix for mail sent by phabricator. It will make use of the fact that
// a mail-address such as phabricator+D123+1hjk213h@example.com will be
// delivered to the phabricator users mailbox.
// Set this to the left part of the email address and it well get
// prepended to all outgoing mail. If you want to use e.g.
// 'phabricator@example.com' this should be set to 'phabricator'.
'metamta.single-reply-handler-prefix' => null,
// Prefix prepended to mail sent by Maniphest. You can change this to
// distinguish between testing and development installs, for example.
'metamta.maniphest.subject-prefix' => '[Maniphest]',
// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
// but allows email replies via Differential.
'metamta.differential.reply-handler-domain' => null,
// See 'metamta.maniphest.reply-handler'. This does the same thing, but
// affects Differential.
'metamta.differential.reply-handler' => 'DifferentialReplyHandler',
// Prefix prepended to mail sent by Differential.
'metamta.differential.subject-prefix' => '[Differential]',
// Set this to true if you want patches to be attached to mail from
// Differential. This won't work if you are using SendGrid as your mail
// adapter.
'metamta.differential.attach-patches' => false,
// To include patches in email bodies, set this to a positive integer. Patches
// will be inlined if they are at most that many lines. For instance, a value
// of 100 means "inline patches if they are no longer than 100 lines". By
// default, patches are not inlined.
'metamta.differential.inline-patches' => 0,
// If you enable either of the options above, you can choose what format
// patches are sent in. Valid options are 'unified' (like diff -u) or 'git'.
'metamta.differential.patch-format' => 'unified',
// Prefix prepended to mail sent by Diffusion.
'metamta.diffusion.subject-prefix' => '[Diffusion]',
// See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
// but allows email replies via Diffusion.
'metamta.diffusion.reply-handler-domain' => null,
// See 'metamta.maniphest.reply-handler'. This does the same thing, but
// affects Diffusion.
'metamta.diffusion.reply-handler' => 'PhabricatorAuditReplyHandler',
// Set this to true if you want patches to be attached to commit notifications
// from Diffusion. This won't work with SendGrid.
'metamta.diffusion.attach-patches' => false,
// To include patches in Diffusion email bodies, set this to a positive
// integer. Patches will be inlined if they are at most that many lines.
// By default, patches are not inlined.
'metamta.diffusion.inline-patches' => 0,
// If you've enabled attached patches or inline patches for commit emails, you
// can establish a hard byte limit on their size. You should generally set
// reasonable byte and time limits (defaults are 1MB and 60 seconds) to avoid
// sending ridiculously enormous email for changes like "importing an external
// library" or "accidentally committed this full-length movie as text".
'metamta.diffusion.byte-limit' => 1024 * 1024,
// If you've enabled attached patches or inline patches for commit emails, you
// can establish a hard time limit on generating them.
'metamta.diffusion.time-limit' => 60,
// Prefix prepended to mail sent by Package.
'metamta.package.subject-prefix' => '[Package]',
// See 'metamta.maniphest.reply-handler'. This does similar thing for package
// except that it only supports sending out mail and doesn't handle incoming
// email.
'metamta.package.reply-handler' => 'OwnersPackageReplyHandler',
// By default, Phabricator generates unique reply-to addresses and sends a
// separate email to each recipient when you enable reply handling. This is
// more secure than using "From" to establish user identity, but can mean
// users may receive multiple emails when they are on mailing lists. Instead,
// you can use a single, non-unique reply to address and authenticate users
// based on the "From" address by setting this to 'true'. This trades away
// a little bit of security for convenience, but it's reasonable in many
// installs. Object interactions are still protected using hashes in the
// single public email address, so objects can not be replied to blindly.
'metamta.public-replies' => false,
// You can configure an email address like "bugs@phabricator.example.com"
// which will automatically create Maniphest tasks when users send email
// to it. This relies on the "From" address to authenticate users, so it is
// is not completely secure. To set this up, enter a complete email
// address like "bugs@phabricator.example.com" and then configure mail to
// that address so it routed to Phabricator (if you've already configured
// reply handlers, you're probably already done). See "Configuring Inbound
// Email" in the documentation for more information.
'metamta.maniphest.public-create-email' => null,
// If you enable 'metamta.public-replies', Phabricator uses "From" to
// authenticate users. You can additionally enable this setting to try to
// authenticate with 'Reply-To'. Note that this is completely spoofable and
// insecure (any user can set any 'Reply-To' address) but depending on the
// nature of your install or other deliverability conditions this might be
// okay. Generally, you can't do much more by spoofing Reply-To than be
// annoying (you can write but not read content). But, you know, this is
// still **COMPLETELY INSECURE**.
'metamta.insecure-auth-with-reply-to' => false,
// If you enable 'metamta.maniphest.public-create-email' and create an
// email address like "bugs@phabricator.example.com", it will default to
// rejecting mail which doesn't come from a known user. However, you might
// want to let anyone send email to this address; to do so, set a default
// author here (a Phabricator username). A typical use of this might be to
// create a "System Agent" user called "bugs" and use that name here. If you
// specify a valid username, mail will always be accepted and used to create
// a task, even if the sender is not a system user. The original email
// address will be stored in an 'From Email' field on the task.
'metamta.maniphest.default-public-author' => null,
// You can disable the Herald hints in email if users prefer smaller messages.
// These are the links under the headers "MANAGE HERALD RULES" and
// "WHY DID I GET THIS EMAIL?". If you set this to true, they will not appear
// in any mail. Users can still navigate to the links via the web interface.
'metamta.herald.show-hints' => true,
// You can disable the hints under "REPLY HANDLER ACTIONS" if users prefer
// smaller messages. The actions themselves will still work properly.
'metamta.reply.show-hints' => true,
// You can disable the "To:" and "Cc:" footers in mail if users prefer
// smaller messages.
'metamta.recipients.show-hints' => true,
// If this option is enabled, Phabricator will add a "Precedence: bulk"
// header to transactional mail (e.g., Differential, Maniphest and Herald
// notifications). This may improve the behavior of some auto-responder
// software and prevent it from replying. However, it may also cause
// deliverability issues -- notably, you currently can not send this header
// via Amazon SES, and enabling this option with SES will prevent delivery
// of any affected mail.
'metamta.precedence-bulk' => false,
// Mail.app on OS X Lion won't respect threading headers unless the subject
// is prefixed with "Re:". If you enable this option, Phabricator will add
// "Re:" to the subject line of all mail which is expected to thread. If
// you've set 'metamta.one-mail-per-recipient', users can override this
// setting in their preferences.
'metamta.re-prefix' => false,
// If true, allow MetaMTA to change mail subjects to put text like
// '[Accepted]' and '[Commented]' in them. This makes subjects more useful,
// but might break threading on some clients. If you've set
// 'metamta.one-mail-per-recipient', users can override this setting in their
// preferences.
'metamta.vary-subjects' => true,
// -- Auth ------------------------------------------------------------------ //
// Can users login with a username/password, or by following the link from
// a password reset email? You can disable this and configure one or more
// OAuth providers instead.
'auth.password-auth-enabled' => true,
// Maximum number of simultaneous web sessions each user is permitted to have.
// Setting this to "1" will prevent a user from logging in on more than one
// browser at the same time.
'auth.sessions.web' => 5,
// Maximum number of simultaneous Conduit sessions each user is permitted
// to have.
'auth.sessions.conduit' => 5,
// Set this true to enable the Settings -> SSH Public Keys panel, which will
// allow users to associated SSH public keys with their accounts. This is only
// really useful if you're setting up services over SSH and want to use
// Phabricator for authentication; in most situations you can leave this
// disabled.
'auth.sshkeys.enabled' => false,
// If true, email addresses must be verified (by clicking a link in an
// email) before a user can login. By default, verification is optional
// unless 'auth.email-domains' is nonempty (see below).
'auth.require-email-verification' => false,
// You can restrict allowed email addresses to certain domains (like
// "yourcompany.com") by setting a list of allowed domains here. Users will
// only be allowed to register using email addresses at one of the domains,
// and will only be able to add new email addresses for these domains. If
// you configure this, it implies 'auth.require-email-verification'.
//
// To configure email domains, set a list of domains like this:
//
// array(
// 'yourcompany.com',
// 'yourcompany.co.uk',
// )
//
// You should omit the "@" from domains. Note that the domain must match
// exactly. If you allow "yourcompany.com", that permits "joe@yourcompany.com"
// but rejects "joe@mail.yourcompany.com".
'auth.email-domains' => array(),
// -- Accounts -------------------------------------------------------------- //
// Is basic account information (email, real name, profile picture) editable?
// If you set up Phabricator to automatically synchronize account information
// from some other authoritative system, you can disable this to ensure
// information remains consistent across both systems.
'account.editable' => true,
// When users set or reset a password, it must have at least this many
// characters.
'account.minimum-password-length' => 8,
// -- Facebook OAuth -------------------------------------------------------- //
// Can users use Facebook credentials to login to Phabricator?
'facebook.auth-enabled' => false,
// Can users use Facebook credentials to create new Phabricator accounts?
'facebook.registration-enabled' => true,
// Are Facebook accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'facebook.auth-permanent' => false,
// The Facebook "Application ID" to use for Facebook API access.
'facebook.application-id' => null,
// The Facebook "Application Secret" to use for Facebook API access.
'facebook.application-secret' => null,
// -- GitHub OAuth ---------------------------------------------------------- //
// Can users use GitHub credentials to login to Phabricator?
'github.auth-enabled' => false,
// Can users use GitHub credentials to create new Phabricator accounts?
'github.registration-enabled' => true,
// Are GitHub accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'github.auth-permanent' => false,
// The GitHub "Client ID" to use for GitHub API access.
'github.application-id' => null,
// The GitHub "Secret" to use for GitHub API access.
'github.application-secret' => null,
// -- Google OAuth ---------------------------------------------------------- //
// Can users use Google credentials to login to Phabricator?
'google.auth-enabled' => false,
// Can users use Google credentials to create new Phabricator accounts?
'google.registration-enabled' => true,
// Are Google accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'google.auth-permanent' => false,
// The Google "Client ID" to use for Google API access.
'google.application-id' => null,
// The Google "Client Secret" to use for Google API access.
'google.application-secret' => null,
// -- LDAP Auth ----------------------------------------------------- //
// Enable ldap auth
'ldap.auth-enabled' => false,
// The LDAP server hostname
'ldap.hostname' => '',
// The LDAP base domain name
'ldap.base_dn' => '',
// The attribute to be regarded as 'username'. Has to be unique
'ldap.search_attribute' => '',
// The attribute(s) to be regarded as 'real name'.
// If more then one attribute is supplied the values of the attributes in
// the array will be joined
'ldap.real_name_attributes' => array(),
// A domain name to use when authenticating against Active Directory
// (e.g. 'example.com')
'ldap.activedirectory_domain' => '',
// The LDAP version
'ldap.version' => 3,
// -- Disqus OAuth ---------------------------------------------------------- //
// Can users use Disqus credentials to login to Phabricator?
'disqus.auth-enabled' => false,
// Can users use Disqus credentials to create new Phabricator accounts?
'disqus.registration-enabled' => true,
// Are Disqus accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'disqus.auth-permanent' => false,
// The Disqus "Client ID" to use for Disqus API access.
'disqus.application-id' => null,
// The Disqus "Client Secret" to use for Disqus API access.
'disqus.application-secret' => null,
// -- Phabricator OAuth ----------------------------------------------------- //
// Meta-town -- Phabricator is itself an OAuth Provider
// TODO -- T887 -- make this support multiple Phabricator instances!
// The URI of the Phabricator instance to use as an OAuth server.
'phabricator.oauth-uri' => null,
// Can users use Phabricator credentials to login to Phabricator?
'phabricator.auth-enabled' => false,
// Can users use Phabricator credentials to create new Phabricator accounts?
'phabricator.registration-enabled' => true,
// Are Phabricator accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'phabricator.auth-permanent' => false,
// The Phabricator "Client ID" to use for Phabricator API access.
'phabricator.application-id' => null,
// The Phabricator "Client Secret" to use for Phabricator API access.
'phabricator.application-secret' => null,
// -- Disqus Comments ------------------------------------------------------- //
// Should Phame users have Disqus comment widget, and if so what's the
// website shortname to use? For example, secure.phabricator.org uses
// "phabricator", which we registered with Disqus. If you aren't familiar
// with Disqus, see:
// Disqus quick start guide - http://docs.disqus.com/help/4/
// Information on shortnames - http://docs.disqus.com/help/68/
'disqus.shortname' => null,
// -- Recaptcha ------------------------------------------------------------- //
// Is Recaptcha enabled? If disabled, captchas will not appear. You should
// enable Recaptcha if your install is public-facing, as it hinders
// brute-force attacks.
'recaptcha.enabled' => false,
// Your Recaptcha public key, obtained from Recaptcha.
'recaptcha.public-key' => null,
// Your Recaptcha private key, obtained from Recaptcha.
'recaptcha.private-key' => null,
// -- Misc ------------------------------------------------------------------ //
// This is hashed with other inputs to generate CSRF tokens. If you want, you
// can change it to some other string which is unique to your install. This
// will make your install more secure in a vague, mostly theoretical way. But
// it will take you like 3 seconds of mashing on your keyboard to set it up so
// you might as well.
'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',
// This is hashed with other inputs to generate mail tokens. If you want, you
// can change it to some other string which is unique to your install. In
// particular, you will want to do this if you accidentally send a bunch of
// mail somewhere you shouldn't have, to invalidate all old reply-to
// addresses.
'phabricator.mail-key' => '5ce3e7e8787f6e40dfae861da315a5cdf1018f12',
// Version string displayed in the footer. You can generate this value from
// Git log or from the current date in the deploy with a script like this:
//
// git log -n1 --pretty=%h > version.txt
//
// You can then use this generated value like this:
//
// 'phabricator.version' =>
// file_get_contents(dirname(__FILE__).'/version.txt'),
'phabricator.version' => 'UNSTABLE',
// PHP requires that you set a timezone in your php.ini before using date
// functions, or it will emit a warning. If this isn't possible (for instance,
// because you are using HPHP) you can set some valid constant for
// date_default_timezone_set() here and Phabricator will set it on your
// behalf, silencing the warning.
'phabricator.timezone' => null,
// When unhandled exceptions occur, stack traces are hidden by default.
// You can enable traces for development to make it easier to debug problems.
'phabricator.show-stack-traces' => false,
// Shows an error callout if a page generated PHP errors, warnings or notices.
// This makes it harder to miss problems while developing Phabricator.
'phabricator.show-error-callout' => false,
// When users write comments which have URIs, they'll be automatically linked
// if the protocol appears in this set. This whitelist is primarily to prevent
// security issues like javascript:// URIs.
'uri.allowed-protocols' => array(
'http' => true,
'https' => true,
),
// Tokenizers are UI controls which let the user select other users, email
// addresses, project names, etc., by typing the first few letters and having
// the control autocomplete from a list. They can load their data in two ways:
// either in a big chunk up front, or as the user types. By default, the data
// is loaded in a big chunk. This is simpler and performs better for small
// datasets. However, if you have a very large number of users or projects,
// (in the ballpark of more than a thousand), loading all that data may become
// slow enough that it's worthwhile to query on demand instead. This makes
// the typeahead slightly less responsive but overall performance will be much
// better if you have a ton of stuff. You can figure out which setting is
// best for your install by changing this setting and then playing with a
// user tokenizer (like the user selectors in Maniphest or Differential) and
// seeing which setting loads faster and feels better.
'tokenizer.ondemand' => false,
// By default, Phabricator includes some silly nonsense in the UI, such as
// a submit button called "Clowncopterize" in Differential and a call to
// "Leap Into Action". If you'd prefer more traditional UI strings like
// "Submit", you can set this flag to disable most of the jokes and easter
// eggs.
'phabricator.serious-business' => false,
// -- Files ----------------------------------------------------------------- //
// Lists which uploaded file types may be viewed in the browser. If a file
// has a mime type which does not appear in this list, it will always be
// downloaded instead of displayed. This is mainly a usability
// consideration, since browsers tend to freak out when viewing enormous
// binary files.
//
// The keys in this array are viewable mime types; the values are the mime
// types they will be delivered as when they are viewed in the browser.
//
// IMPORTANT: Configure 'security.alternate-file-domain' above! Your install
// is NOT safe if it is left unconfigured.
'files.viewable-mime-types' => array(
'image/jpeg' => 'image/jpeg',
'image/jpg' => 'image/jpg',
'image/png' => 'image/png',
'image/gif' => 'image/gif',
'text/plain' => 'text/plain; charset=utf-8',
'text/x-diff' => 'text/plain; charset=utf-8',
// ".ico" favicon files, which have mime type diversity. See:
// http://en.wikipedia.org/wiki/ICO_(file_format)#MIME_type
'image/x-ico' => 'image/x-icon',
'image/x-icon' => 'image/x-icon',
'image/vnd.microsoft.icon' => 'image/x-icon',
),
// List of mime types which can be used as the source for an ![]()
tag.
// This should be a subset of 'files.viewable-mime-types' and exclude files
// like text.
'files.image-mime-types' => array(
'image/jpeg' => true,
'image/jpg' => true,
'image/png' => true,
'image/gif' => true,
'image/x-ico' => true,
'image/x-icon' => true,
'image/vnd.microsoft.icon' => true,
),
// Phabricator can proxy images from other servers so you can paste the URI
// to a funny picture of a cat into the comment box and have it show up as an
// image. However, this means the webserver Phabricator is running on will
// make HTTP requests to arbitrary URIs. If the server has access to internal
// resources, this could be a security risk. You should only enable it if you
// are installed entirely a VPN and VPN access is required to access
// Phabricator, or if the webserver has no special access to anything. If
// unsure, it is safer to leave this disabled.
'files.enable-proxy' => false,
// -- Storage --------------------------------------------------------------- //
// Phabricator allows users to upload files, and can keep them in various
// storage engines. This section allows you to configure which engines
// Phabricator will use, and how it will use them.
// The largest filesize Phabricator will store in the MySQL BLOB storage
// engine, which just uses a database table to store files. While this isn't a
// best practice, it's really easy to set up. This is hard-limited by the
// value of 'max_allowed_packet' in MySQL (since this often defaults to 1MB,
// the default here is slightly smaller than 1MB). Set this to 0 to disable
// use of the MySQL blob engine.
'storage.mysql-engine.max-size' => 1000000,
// Phabricator provides a local disk storage engine, which just writes files
// to some directory on local disk. The webserver must have read/write
// permissions on this directory. This is straightforward and suitable for
// most installs, but will not scale past one web frontend unless the path
// is actually an NFS mount, since you'll end up with some of the files
// written to each web frontend and no way for them to share. To use the
// local disk storage engine, specify the path to a directory here. To
// disable it, specify null.
'storage.local-disk.path' => null,
// If you want to store files in Amazon S3, specify an AWS access and secret
// key here and a bucket name below.
'amazon-s3.access-key' => null,
'amazon-s3.secret-key' => null,
// Set this to a valid Amazon S3 bucket to store files there. You must also
// configure S3 access keys above.
'storage.s3.bucket' => null,
// Phabricator uses a storage engine selector to choose which storage engine
// to use when writing file data. If you add new storage engines or want to
// provide very custom rules (e.g., write images to one storage engine and
// other files to a different one), you can provide an alternate
// implementation here. The default engine will use choose MySQL, Local Disk,
// and S3, in that order, if they have valid configurations above and a file
// fits within configured limits.
'storage.engine-selector' => 'PhabricatorDefaultFileStorageEngineSelector',
// Set the size of the largest file a user may upload. This is used to render
// text like "Maximum file size: 10MB" on interfaces where users can upload
// files, and files larger than this size will be rejected.
//
// Specify this limit in bytes, or using a "K", "M", or "G" suffix.
//
// NOTE: Setting this to a large size is NOT sufficient to allow users to
// upload large files. You must also configure a number of other settings. To
// configure file upload limits, consult the article "Configuring File Upload
// Limits" in the documentation. Once you've configured some limit across all
// levels of the server, you can set this limit to an appropriate value and
// the UI will then reflect the actual configured limit.
'storage.upload-size-limit' => null,
// Phabricator puts databases in a namespace, which defualts to "phabricator"
// -- for instance, the Differential database is named
// "phabricator_differential" by default. You can change this namespace if you
// want. Normally, you should not do this unless you are developing
// Phabricator and using namespaces to separate multiple sandbox datasets.
'storage.default-namespace' => 'phabricator',
// -- Search ---------------------------------------------------------------- //
// Phabricator supports Elastic Search; to use it, specify a host like
// 'http://elastic.example.com:9200/' here.
'search.elastic.host' => null,
// Phabricator uses a search engine selector to choose which search engine
// to use when indexing and reconstructing documents, and when executing
// queries. You can override the engine selector to provide a new selector
// class which can select some custom engine you implement, if you want to
// store your documents in some search engine which does not have default
// support.
'search.engine-selector' => 'PhabricatorDefaultSearchEngineSelector',
// -- Differential ---------------------------------------------------------- //
'differential.revision-custom-detail-renderer' => null,
// Array for custom remarkup rules. The array should have a list of
// class names of classes that extend PhutilRemarkupRule
'differential.custom-remarkup-rules' => null,
// Array for custom remarkup block rules. The array should have a list of
// class names of classes that extend PhutilRemarkupEngineBlockRule
'differential.custom-remarkup-block-rules' => null,
// Set display word-wrap widths for Differential. Specify a dictionary of
// regular expressions mapping to column widths. The filename will be matched
// against each regexp in order until one matches. The default configuration
// uses a width of 100 for Java and 80 for other languages. Note that 80 is
// the greatest column width of all time. Changes here will not be immediately
// reflected in old revisions unless you purge the changeset render cache
// (with `./scripts/util/purge_cache.php --changesets`).
'differential.wordwrap' => array(
'/\.java$/' => 100,
'/.*/' => 80,
),
// List of file regexps where whitespace is meaningful and should not
// use 'ignore-all' by default
'differential.whitespace-matters' => array(
'/\.py$/',
'/\.l?hs$/',
),
'differential.field-selector' => 'DifferentialDefaultFieldSelector',
// Differential can show "Host" and "Path" fields on revisions, with
// information about the machine and working directory where the
// change came from. These fields are disabled by default because they may
// occasionally have sensitive information; you can set this to true to
// enable them.
'differential.show-host-field' => false,
// Differential has a required "Test Plan" field by default, which requires
// authors to fill out information about how they verified the correctness of
// their changes when sending code for review. If you'd prefer not to use
// this field, you can disable it here. You can also make it optional
// (instead of required) below.
'differential.show-test-plan-field' => true,
// Differential has a required "Test Plan" field by default. You can make it
// optional by setting this to false. You can also completely remove it above,
// if you prefer.
'differential.require-test-plan-field' => true,
// If you set this to true, users can "!accept" revisions via email (normally,
// they can take other actions but can not "!accept"). This action is disabled
// by default because email authentication can be configured to be very weak,
// and, socially, email "!accept" is kind of sketchy and implies revisions may
// not actually be receiving thorough review.
'differential.enable-email-accept' => false,
// If you set this to true, users won't need to login to view differential
// revisions. Anonymous users will have read-only access and won't be able to
// interact with the revisions.
'differential.anonymous-access' => false,
// List of file regexps that should be treated as if they are generated by
// an automatic process, and thus get hidden by default in differential.
'differential.generated-paths' => array(
// '/config\.h$/',
// '#/autobuilt/#',
),
// If you set this to true, users can accept their own revisions. This action
// is disabled by default because it's most likely not a behavior you want,
// but it proves useful if you are working alone on a project and want to make
// use of all of differential's features.
'differential.allow-self-accept' => false,
// -- Maniphest ------------------------------------------------------------- //
'maniphest.enabled' => true,
// Array of custom fields for Maniphest tasks. For details on adding custom
// fields to Maniphest, see "Maniphest User Guide: Adding Custom Fields".
'maniphest.custom-fields' => array(),
// Class which drives custom field construction. See "Maniphest User Guide:
// Adding Custom Fields" in the documentation for more information.
'maniphest.custom-task-extensions-class' => 'ManiphestDefaultTaskExtensions',
// -- Phriction ------------------------------------------------------------- //
'phriction.enabled' => true,
// -- Remarkup -------------------------------------------------------------- //
// If you enable this, linked YouTube videos will be embeded inline. This has
// mild security implications (you'll leak referrers to YouTube) and is pretty
// silly (but sort of awesome).
'remarkup.enable-embedded-youtube' => false,
// -- Garbage Collection ---------------------------------------------------- //
// Phabricator generates various logs and caches in the database which can
// be garbage collected after a while to make the total data size more
// manageable. To run garbage collection, launch a
// PhabricatorGarbageCollector daemon.
// Since the GC daemon can issue large writes and table scans, you may want to
// run it only during off hours or make sure it is scheduled so it doesn't
// overlap with backups. This determines when the daemon can start running
// each day.
'gcdaemon.run-at' => '12 AM',
// How many seconds after 'gcdaemon.run-at' the daemon may collect garbage
// for. By default it runs continuously, but you can set it to run for a
// limited period of time. For instance, if you do backups at 3 AM, you might
// run garbage collection for an hour beforehand. This is not a high-precision
// limit so you may want to leave some room for the GC to actually stop, and
// if you set it to something like 3 seconds you're on your own.
'gcdaemon.run-for' => 24 * 60 * 60,
// These 'ttl' keys configure how much old data the GC daemon keeps around.
// Objects older than the ttl will be collected. Set any value to 0 to store
// data indefinitely.
'gcdaemon.ttl.herald-transcripts' => 30 * (24 * 60 * 60),
'gcdaemon.ttl.daemon-logs' => 7 * (24 * 60 * 60),
'gcdaemon.ttl.differential-parse-cache' => 14 * (24 * 60 * 60),
'gcdaemon.ttl.markup-cache' => 30 * (24 * 60 * 60),
// -- Feed ------------------------------------------------------------------ //
// If you set this to true, you can embed Phabricator activity feeds in other
// pages using iframes. These feeds are completely public, and a login is not
// required to view them! This is intended for things like open source
// projects that want to expose an activity feed on the project homepage.
//
// NOTE: You must also set `policy.allow-public` to true for this setting
// to work properly.
'feed.public' => false,
// -- Drydock --------------------------------------------------------------- //
// If you want to use Drydock's builtin EC2 Blueprints, configure your AWS
// EC2 credentials here.
'amazon-ec2.access-key' => null,
'amazon-ec2.secret-key' => null,
// -- Customization --------------------------------------------------------- //
// Paths to additional phutil libraries to load.
'load-libraries' => array(),
'aphront.default-application-configuration-class' =>
'AphrontDefaultApplicationConfiguration',
'controller.oauth-registration' =>
'PhabricatorOAuthDefaultRegistrationController',
// Directory that phd (the Phabricator daemon control script) should use to
// track running daemons.
'phd.pid-directory' => '/var/tmp/phd',
// Number of "TaskMaster" daemons that "phd start" should start. You can
// raise this if you have a task backlog, or explicitly launch more with
// "phd launch taskmaster".
'phd.start-taskmasters' => 4,
// Launch daemons in "verbose" mode by default. This creates a lot of output,
// but can help debug issues. Daemons launched in debug mode with "phd debug"
// are always launched in verbose mode. See also 'phd.trace'.
'phd.verbose' => false,
// Launch daemons in "trace" mode by default. This creates an ENORMOUS amount
// of output, but can help debug issues. Daemons launched in debug mode with
// "phd debug" are always launched in trace mdoe. See also 'phd.verbose'.
'phd.trace' => false,
// Path to custom celerity resource map relative to 'phabricator/src'.
// See also `scripts/celerity_mapper.php`.
'celerity.resource-path' => '__celerity_resource_map__.php',
// This value is an input to the hash function when building resource hashes.
// It has no security value, but if you accidentally poison user caches (by
// pushing a bad patch or having something go wrong with a CDN, e.g.) you can
// change this to something else and rebuild the Celerity map to break user
// caches. Unless you are doing Celerity development, it is exceptionally
// unlikely that you need to modify this.
'celerity.resource-hash' => 'd9455ea150622ee044f7931dabfa52aa',
// In a development environment, it is desirable to force static resources
// (CSS and JS) to be read from disk on every request, so that edits to them
// appear when you reload the page even if you haven't updated the resource
// maps. This setting ensures requests will be verified against the state on
// disk. Generally, you should leave this off in production (caching behavior
// and performance improve with it off) but turn it on in development. (These
// settings are the defaults.)
'celerity.force-disk-reads' => false,
// Minify static resources by removing whitespace and comments. You should
// enable this in production, but disable it in development.
'celerity.minify' => false,
// You can respond to various application events by installing listeners,
// which will receive callbacks when interesting things occur. Specify a list
// of classes which extend PhabricatorEventListener here.
'events.listeners' => array(),
// -- Syntax Highlighting --------------------------------------------------- //
// Phabricator can highlight PHP by default and use Pygments for other
// languages if enabled. You can provide a custom highlighter engine by
// extending class PhutilSyntaxHighlighterEngine.
'syntax-highlighter.engine' => 'PhutilDefaultSyntaxHighlighterEngine',
// If you want syntax highlighting for other languages than PHP then you can
// install the python package 'Pygments', make sure the 'pygmentize' script is
// available in the $PATH of the webserver, and then enable this.
'pygments.enabled' => false,
// In places that we display a dropdown to syntax-highlight code,
// this is where that list is defined.
// Syntax is 'lexer-name' => 'Display Name',
'pygments.dropdown-choices' => array(
'apacheconf' => 'Apache Configuration',
'bash' => 'Bash Scripting',
'brainfuck' => 'Brainf*ck',
'c' => 'C',
'cpp' => 'C++',
'css' => 'CSS',
'diff' => 'Diff',
'django' => 'Django Templating',
'erb' => 'Embedded Ruby/ERB',
'erlang' => 'Erlang',
'html' => 'HTML',
'infer' => 'Infer from title (extension)',
'java' => 'Java',
'js' => 'Javascript',
'mysql' => 'MySQL',
'perl' => 'Perl',
'php' => 'PHP',
'text' => 'Plain Text',
'python' => 'Python',
'rainbow' => 'Rainbow',
'remarkup' => 'Remarkup',
'ruby' => 'Ruby',
'xml' => 'XML',
),
'pygments.dropdown-default' => 'infer',
// This is an override list of regular expressions which allows you to choose
// what language files are highlighted as. If your projects have certain rules
// about filenames or use unusual or ambiguous language extensions, you can
// create a mapping here. This is an ordered dictionary of regular expressions
// which will be tested against the filename. They should map to either an
// explicit language as a string value, or a numeric index into the captured
// groups as an integer.
'syntax.filemap' => array(
// Example: Treat all '*.xyz' files as PHP.
// '@\\.xyz$@' => 'php',
// Example: Treat 'httpd.conf' as 'apacheconf'.
// '@/httpd\\.conf$@' => 'apacheconf',
// Example: Treat all '*.x.bak' file as '.x'. NOTE: we map to capturing
// group 1 by specifying the mapping as "1".
// '@\\.([^.]+)\\.bak$@' => 1,
'@\.arcconfig$@' => 'js',
'@\.divinerconfig$@' => 'js',
),
// Set the default monospaced font style for users who haven't set a custom
// style.
'style.monospace' => '10px "Menlo", "Consolas", "Monaco", monospace',
+// -- Debugging ------------------------------------------------------------- //
+
+ // Enable this to change HTTP redirects into normal pages with a link to the
+ // redirection target. For example, after you submit a form you'll get a page
+ // saying "normally, you'd be redirected...". This is useful to examine
+ // service or profiler information on write pathways, or debug redirects. It
+ // also makes the UX horrible for normal use, so you should enable it only
+ // when debugging.
+ //
+ // NOTE: This does not currently work for forms with Javascript "workflow",
+ // since the redirect happens in Javascript.
+ 'debug.stop-on-redirect' => false,
+
+ // Enable this to always profile every page. This is very slow! You should
+ // only enable it when debugging.
+ 'debug.profile-every-request' => false,
+
);
diff --git a/src/aphront/console/plugin/DarkConsoleXHProfPlugin.php b/src/aphront/console/plugin/DarkConsoleXHProfPlugin.php
index e2a03d7804..0c38b60f99 100644
--- a/src/aphront/console/plugin/DarkConsoleXHProfPlugin.php
+++ b/src/aphront/console/plugin/DarkConsoleXHProfPlugin.php
@@ -1,112 +1,112 @@
getData();
if ($run) {
return '• XHProf';
}
return 'XHProf';
}
public function getDescription() {
return 'Provides detailed PHP profiling information through XHProf.';
}
public function generateData() {
return $this->xhprofID;
}
public function getXHProfRunID() {
return $this->xhprofID;
}
public function render() {
if (!DarkConsoleXHProfPluginAPI::isProfilerAvailable()) {
$href = PhabricatorEnv::getDoclink('article/Installation_Guide.html');
$install_guide = phutil_render_tag(
'a',
array(
'href' => $href,
'class' => 'bright-link',
),
'Installation Guide');
return
''.
'The "xhprof" PHP extension is not available. Install xhprof '.
'to enable the XHProf console plugin. You can find instructions in '.
'the '.$install_guide.'.'.
'
';
}
$result = array();
$run = $this->getXHProfRunID();
$header =
'';
$result[] = $header;
if ($run) {
$result[] =
'Profile Permalink'.
'';
} else {
$result[] =
''.
'Profiling was not enabled for this page. Use the button above '.
'to enable it.'.
'
';
}
return implode("\n", $result);
}
public function willShutdown() {
- if (isset($_REQUEST['__profile__']) &&
- $_REQUEST['__profile__'] != 'all') {
+ if (DarkConsoleXHProfPluginAPI::isProfilerRequested() &&
+ (DarkConsoleXHProfPluginAPI::isProfilerRequested() !== 'all')) {
$this->xhprofID = DarkConsoleXHProfPluginAPI::stopProfiler();
}
}
}
diff --git a/src/aphront/console/plugin/xhprof/DarkConsoleXHProfPluginAPI.php b/src/aphront/console/plugin/xhprof/DarkConsoleXHProfPluginAPI.php
index 38bc063aed..8ab312c4df 100644
--- a/src/aphront/console/plugin/xhprof/DarkConsoleXHProfPluginAPI.php
+++ b/src/aphront/console/plugin/xhprof/DarkConsoleXHProfPluginAPI.php
@@ -1,90 +1,127 @@
'application/xhprof',
- 'name' => 'profile.xhprof',
- ));
- return $file->getPHID();
+ // Since these happen on GET we can't do guarded writes. These also
+ // sometimes happen after we've disposed of the write guard; in this
+ // case we need to disable the whole mechanism.
+
+ $use_scope = AphrontWriteGuard::isGuardActive();
+ if ($use_scope) {
+ $unguarded = AphrontWriteGuard::beginScopedUnguardedWrites();
+ } else {
+ AphrontWriteGuard::allowDangerousUnguardedWrites(true);
+ }
+
+ $caught = null;
+ try {
+ $file = call_user_func(
+ array($file_class, 'newFromFileData'),
+ $data,
+ array(
+ 'mime-type' => 'application/xhprof',
+ 'name' => 'profile.xhprof',
+ ));
+ } catch (Exception $ex) {
+ $caught = $ex;
+ }
+
+ if ($use_scope) {
+ unset($unguarded);
+ } else {
+ AphrontWriteGuard::allowDangerousUnguardedWrites(false);
+ }
+
+ if ($caught) {
+ throw $caught;
+ } else {
+ return $file->getPHID();
+ }
} else {
return null;
}
}
}
diff --git a/src/aphront/response/AphrontRedirectResponse.php b/src/aphront/response/AphrontRedirectResponse.php
index f49681436b..7d060bb16b 100644
--- a/src/aphront/response/AphrontRedirectResponse.php
+++ b/src/aphront/response/AphrontRedirectResponse.php
@@ -1,49 +1,81 @@
uri = $uri;
return $this;
}
public function getURI() {
return (string)$this->uri;
}
+ public function shouldStopForDebugging() {
+ return PhabricatorEnv::getEnvConfig('debug.stop-on-redirect');
+ }
+
public function getHeaders() {
- $headers = array(
- array('Location', $this->uri),
- );
+ $headers = array();
+ if (!$this->shouldStopForDebugging()) {
+ $headers[] = array('Location', $this->uri);
+ }
$headers = array_merge(parent::getHeaders(), $headers);
return $headers;
}
public function buildResponseString() {
+ if ($this->shouldStopForDebugging()) {
+ $view = new PhabricatorStandardPageView();
+ $view->setRequest($this->getRequest());
+ $view->setApplicationName('Debug');
+ $view->setTitle('Stopped on Redirect');
+
+ $error = new AphrontErrorView();
+ $error->setSeverity(AphrontErrorView::SEVERITY_NOTICE);
+ $error->setTitle('Stopped on Redirect');
+
+ $link = phutil_render_tag(
+ 'a',
+ array(
+ 'href' => $this->getURI(),
+ ),
+ 'Continue to: '.phutil_escape_html($this->getURI()));
+
+ $error->appendChild(
+ 'You were stopped here because debug.stop-on-redirect '.
+ 'is set in your configuration.
'.
+ ''.$link.'
');
+
+ $view->appendChild($error);
+
+ return $view->render();
+ }
+
return '';
}
}
diff --git a/src/aphront/writeguard/AphrontWriteGuard.php b/src/aphront/writeguard/AphrontWriteGuard.php
index 38d6ce7ad2..e0a61284cf 100644
--- a/src/aphront/writeguard/AphrontWriteGuard.php
+++ b/src/aphront/writeguard/AphrontWriteGuard.php
@@ -1,256 +1,267 @@
dispose();
*
* Normally, you do not need to manage guards yourself -- the Aphront stack
* handles it for you.
*
* @param AphrontRequest Request to read CSRF token information from.
* @return this
* @task manage
*/
public function __construct(AphrontRequest $request) {
if (self::$instance) {
throw new Exception(
"An AphrontWriteGuard already exists. Dispose of the previous guard ".
"before creating a new one.");
}
if (self::$allowUnguardedWrites) {
throw new Exception(
"An AphrontWriteGuard is being created in a context which permits ".
"unguarded writes unconditionally. This is not allowed and indicates ".
"a serious error.");
}
$this->request = $request;
self::$instance = $this;
}
/**
* Dispose of the active write guard. You must call this method when you are
* done with a write guard. You do not normally need to call this yourself.
*
* @return void
* @task manage
*/
public function dispose() {
if ($this->allowDepth > 0) {
throw new Exception(
"Imbalanced AphrontWriteGuard: more beginUnguardedWrites() calls than ".
"endUnguardedWrites() calls.");
}
self::$instance = null;
}
+ /**
+ * Determine if there is an active write guard.
+ *
+ * @return bool
+ * @task manage
+ */
+ public static function isGuardActive() {
+ return (bool)self::$instance;
+ }
+
+
/* -( Protecting Writes )-------------------------------------------------- */
/**
* Declare intention to perform a write, validating that writes are allowed.
* You should call this method before executing a write whenever you implement
* a new storage engine where information can be permanently kept.
*
* Writes are permitted if:
*
* - The request has valid CSRF tokens.
* - Unguarded writes have been temporarily enabled by a call to
* @{method:beginUnguardedWrites}.
* - All write guarding has been disabled with
* @{method:allowDangerousUnguardedWrites}.
*
* If none of these conditions are true, this method will throw and prevent
* the write.
*
* @return void
* @task protect
*/
public static function willWrite() {
if (!self::$instance) {
if (!self::$allowUnguardedWrites) {
throw new Exception(
"Unguarded write! There must be an active AphrontWriteGuard to ".
"perform writes.");
} else {
// Unguarded writes are being allowed unconditionally.
return;
}
}
$instance = self::$instance;
if ($instance->allowDepth == 0) {
$instance->request->validateCSRF();
}
}
/* -( Disabling Write Protection )----------------------------------------- */
/**
* Enter a scope which permits unguarded writes. This works like
* @{method:beginUnguardedWrites} but returns an object which will end
* the unguarded write scope when its __destruct() method is called. This
* is useful to more easily handle exceptions correctly in unguarded write
* blocks:
*
* // Restores the guard even if do_logging() throws.
* function unguarded_scope() {
* $unguarded = AphrontWriteGuard::beginScopedUnguardedWrites();
* do_logging();
* }
*
* @return AphrontScopedUnguardedWriteCapability Object which ends unguarded
* writes when it leaves scope.
* @task disable
*/
public static function beginScopedUnguardedWrites() {
self::beginUnguardedWrites();
return new AphrontScopedUnguardedWriteCapability();
}
/**
* Begin a block which permits unguarded writes. You should use this very
* sparingly, and only for things like logging where CSRF is not a concern.
*
* You must pair every call to @{method:beginUnguardedWrites} with a call to
* @{method:endUnguardedWrites}:
*
* AphrontWriteGuard::beginUnguardedWrites();
* do_logging();
* AphrontWriteGuard::endUnguardedWrites();
*
* @return void
* @task disable
*/
public static function beginUnguardedWrites() {
if (!self::$instance) {
return;
}
self::$instance->allowDepth++;
}
/**
* Declare that you have finished performing unguarded writes. You must
* call this exactly once for each call to @{method:beginUnguardedWrites}.
*
* @return void
* @task disable
*/
public static function endUnguardedWrites() {
if (!self::$instance) {
return;
}
if (self::$instance->allowDepth <= 0) {
throw new Exception(
"Imbalanced AphrontWriteGuard: more endUnguardedWrites() calls than ".
"beginUnguardedWrites() calls.");
}
self::$instance->allowDepth--;
}
/**
* Allow execution of unguarded writes. This is ONLY appropriate for use in
* script contexts or other contexts where you are guaranteed to never be
* vulnerable to CSRF concerns. Calling this method is EXTREMELY DANGEROUS
* if you do not understand the consequences.
*
* If you need to perform unguarded writes on an otherwise guarded workflow
* which is vulnerable to CSRF, use @{method:beginUnguardedWrites}.
*
* @return void
* @task disable
*/
public static function allowDangerousUnguardedWrites($allow) {
if (self::$instance) {
throw new Exception(
"You can not unconditionally disable AphrontWriteGuard by calling ".
"allowDangerousUnguardedWrites() while a write guard is active. Use ".
"beginUnguardedWrites() to temporarily allow unguarded writes.");
}
self::$allowUnguardedWrites = true;
}
/* -( Internals )---------------------------------------------------------- */
/**
* When the object is destroyed, make sure @{method:dispose} was called.
*/
public function __destruct() {
if (isset(self::$instance)) {
throw new Exception(
"AphrontWriteGuard was not properly disposed of! Call dispose() on ".
"every AphrontWriteGuard object you instantiate.");
}
}
}
diff --git a/webroot/index.php b/webroot/index.php
index 1b5076134a..cfca18e57a 100644
--- a/webroot/index.php
+++ b/webroot/index.php
@@ -1,392 +1,392 @@
', where '' ".
"is one of 'development', 'production', or a custom environment.");
}
if (!isset($_REQUEST['__path__'])) {
phabricator_fatal_config_error(
"__path__ is not set. Your rewrite rules are not configured correctly.");
}
if (get_magic_quotes_gpc()) {
phabricator_fatal_config_error(
"Your server is configured with PHP 'magic_quotes_gpc' enabled. This ".
"feature is 'highly discouraged' by PHP's developers and you must ".
"disable it to run Phabricator. Consult the PHP manual for instructions.");
}
register_shutdown_function('phabricator_shutdown');
require_once dirname(dirname(__FILE__)).'/conf/__init_conf__.php';
try {
setup_aphront_basics();
$conf = phabricator_read_config_file($env);
$conf['phabricator.env'] = $env;
PhabricatorEnv::setEnvConfig($conf);
// This needs to be done before we create the log, because
// PhabricatorAccessLog::getLog() calls date()
$tz = PhabricatorEnv::getEnvConfig('phabricator.timezone');
if ($tz) {
date_default_timezone_set($tz);
}
// This is the earliest we can get away with this, we need env config first.
PhabricatorAccessLog::init();
$access_log = PhabricatorAccessLog::getLog();
if ($access_log) {
$access_log->setData(
array(
'R' => idx($_SERVER, 'HTTP_REFERER', '-'),
'r' => idx($_SERVER, 'REMOTE_ADDR', '-'),
'M' => idx($_SERVER, 'REQUEST_METHOD', '-'),
));
}
DarkConsoleXHProfPluginAPI::hookProfiler();
PhutilErrorHandler::initialize();
} catch (Exception $ex) {
phabricator_fatal("[Initialization Exception] ".$ex->getMessage());
}
PhutilErrorHandler::setErrorListener(
array('DarkConsoleErrorLogPluginAPI', 'handleErrors'));
foreach (PhabricatorEnv::getEnvConfig('load-libraries') as $library) {
phutil_load_library($library);
}
if (PhabricatorEnv::getEnvConfig('phabricator.setup')) {
try {
PhabricatorSetup::runSetup();
} catch (Exception $ex) {
echo "EXCEPTION!\n";
echo $ex;
}
return;
}
phabricator_detect_bad_base_uri();
$translation = PhabricatorEnv::newObjectFromConfig('translation.provider');
PhutilTranslator::getInstance()
->setLanguage($translation->getLanguage())
->addTranslations($translation->getTranslations());
$host = $_SERVER['HTTP_HOST'];
$path = $_REQUEST['__path__'];
switch ($host) {
default:
$config_key = 'aphront.default-application-configuration-class';
$application = PhabricatorEnv::newObjectFromConfig($config_key);
break;
}
$application->setHost($host);
$application->setPath($path);
$application->willBuildRequest();
$request = $application->buildRequest();
$write_guard = new AphrontWriteGuard($request);
PhabricatorEventEngine::initialize();
$application->setRequest($request);
list($controller, $uri_data) = $application->buildController();
if ($access_log) {
$access_log->setData(
array(
'U' => (string)$request->getRequestURI()->getPath(),
'C' => get_class($controller),
));
}
// If execution throws an exception and then trying to render that exception
// throws another exception, we want to show the original exception, as it is
// likely the root cause of the rendering exception.
$original_exception = null;
try {
$response = $controller->willBeginExecution();
if ($access_log) {
if ($request->getUser() && $request->getUser()->getPHID()) {
$access_log->setData(
array(
'u' => $request->getUser()->getUserName(),
));
}
}
if (!$response) {
$controller->willProcessRequest($uri_data);
$response = $controller->processRequest();
}
} catch (AphrontRedirectException $ex) {
$response = id(new AphrontRedirectResponse())
->setURI($ex->getURI());
} catch (Exception $ex) {
$original_exception = $ex;
$response = $application->handleException($ex);
}
try {
$response = $application->willSendResponse($response);
$response->setRequest($request);
$response_string = $response->buildResponseString();
} catch (Exception $ex) {
$write_guard->dispose();
if ($access_log) {
$access_log->write();
}
if ($original_exception) {
$ex = new PhutilAggregateException(
"Multiple exceptions during processing and rendering.",
array(
$original_exception,
$ex,
));
}
phabricator_fatal('[Rendering Exception] '.$ex->getMessage());
}
$write_guard->dispose();
// TODO: Share the $sink->writeResponse() pathway here?
$sink = new AphrontPHPHTTPSink();
$sink->writeHTTPStatus($response->getHTTPResponseCode());
$headers = $response->getCacheHeaders();
$headers = array_merge($headers, $response->getHeaders());
$sink->writeHeaders($headers);
// TODO: This shouldn't be possible in a production-configured environment.
-if (isset($_REQUEST['__profile__']) &&
- ($_REQUEST['__profile__'] == 'all')) {
+if (DarkConsoleXHProfPluginAPI::isProfilerRequested() &&
+ DarkConsoleXHProfPluginAPI::isProfilerRequested() === 'all') {
$profile = DarkConsoleXHProfPluginAPI::stopProfiler();
$profile =
'';
if (strpos($response_string, '') !== false) {
$response_string = str_replace(
'',
''.$profile,
$response_string);
} else {
$sink->writeData($profile);
}
}
$sink->writeData($response_string);
if ($access_log) {
$access_log->setData(
array(
'c' => $response->getHTTPResponseCode(),
'T' => (int)(1000000 * (microtime(true) - $__start__)),
));
$access_log->write();
}
/**
* @group aphront
*/
function setup_aphront_basics() {
$aphront_root = dirname(dirname(__FILE__));
$libraries_root = dirname($aphront_root);
$root = null;
if (!empty($_SERVER['PHUTIL_LIBRARY_ROOT'])) {
$root = $_SERVER['PHUTIL_LIBRARY_ROOT'];
}
ini_set(
'include_path',
$libraries_root.PATH_SEPARATOR.ini_get('include_path'));
@include_once $root.'libphutil/src/__phutil_library_init__.php';
if (!@constant('__LIBPHUTIL__')) {
echo "ERROR: Unable to load libphutil. Put libphutil/ next to ".
"phabricator/, or update your PHP 'include_path' to include ".
"the parent directory of libphutil/.\n";
exit(1);
}
// Load Phabricator itself using the absolute path, so we never end up doing
// anything surprising (loading index.php and libraries from different
// directories).
phutil_load_library($aphront_root.'/src');
phutil_load_library('arcanist/src');
}
function phabricator_fatal_config_error($msg) {
phabricator_fatal("CONFIG ERROR: ".$msg."\n");
}
function phabricator_detect_bad_base_uri() {
$conf = PhabricatorEnv::getEnvConfig('phabricator.base-uri');
$uri = new PhutilURI($conf);
switch ($uri->getProtocol()) {
case 'http':
case 'https':
break;
default:
return phabricator_fatal_config_error(
"'phabricator.base-uri' is set to '{$conf}', which is invalid. ".
"The URI must start with 'http://' or 'https://'.");
}
if (strpos($uri->getDomain(), '.') === false) {
phabricator_fatal_config_error(
"'phabricator.base-uri' is set to '{$conf}', which is invalid. The URI ".
"must contain a dot ('.'), like 'http://example.com/', not just ".
"'http://example/'. Some web browsers will not set cookies on domains ".
"with no TLD, and Phabricator requires cookies for login. ".
"If you are using localhost, create an entry in the hosts file like ".
"'127.0.0.1 example.com', and access the localhost with ".
"'http://example.com/'.");
}
}
function phabricator_detect_insane_memory_limit() {
$memory_limit = ini_get('memory_limit');
$char_limit = 12;
if (strlen($memory_limit) <= $char_limit) {
return;
}
// colmdoyle ran into an issue on an Ubuntu box with Suhosin where his
// 'memory_limit' was set to:
//
// 3232323232323232323232323232323232323232323232323232323232323232M
//
// Not a typo. A wizard did it.
//
// Anyway, with this 'memory_limit', the machine would immediately fatal
// when executing the ini_set() later. I wasn't able to reproduce this on my
// EC2 Ubuntu + Suhosin box, but verified that it caused the problem on his
// machine and that setting it to a more sensible value fixed it. Since I
// have no idea how to actually trigger the issue, we look for a coarse
// approximation of it (a memory_limit setting more than 12 characters in
// length).
phabricator_fatal_config_error(
"Your PHP 'memory_limit' is set to something ridiculous ".
"(\"{$memory_limit}\"). Set it to a more reasonable value (it must be no ".
"more than {$char_limit} characters long).");
}
function phabricator_shutdown() {
$event = error_get_last();
if (!$event) {
return;
}
if ($event['type'] != E_ERROR && $event['type'] != E_PARSE) {
return;
}
$msg = ">>> UNRECOVERABLE FATAL ERROR <<<\n\n";
if ($event) {
// Even though we should be emitting this as text-plain, escape things just
// to be sure since we can't really be sure what the program state is when
// we get here.
$msg .= phutil_escape_html($event['message'])."\n\n";
$msg .= phutil_escape_html($event['file'].':'.$event['line']);
}
// flip dem tables
$msg .= "\n\n\n";
$msg .= "\xe2\x94\xbb\xe2\x94\x81\xe2\x94\xbb\x20\xef\xb8\xb5\x20\xc2\xaf".
"\x5c\x5f\x28\xe3\x83\x84\x29\x5f\x2f\xc2\xaf\x20\xef\xb8\xb5\x20".
"\xe2\x94\xbb\xe2\x94\x81\xe2\x94\xbb";
phabricator_fatal($msg);
}
function phabricator_fatal($msg) {
global $access_log;
if ($access_log) {
$access_log->setData(
array(
'c' => 500,
));
$access_log->write();
}
header(
'Content-Type: text/plain; charset=utf-8',
$replace = true,
$http_error = 500);
error_log($msg);
echo $msg;
exit(1);
}